|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Procedure used in T1 transmission facilities in which each of the 24 T1 subchannels devotes one bit of every sixth frame to the carrying of supervisory signaling information. Also called 24th channel signaling.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
ATM adaptation layer. Service-dependent sublayer of the data link layer. The AAL accepts data from different applications and presents it to the ATM layer in the form of 48-byte ATM payload segments. AALs consist of two sublayers, CS and SAR. AALsdiffer on the basis of the source-destination timing used, whether they use CBR or VBR, and whether they are used for connection-oriented or connectionless mode data transfer. At present, the four types of AAL recommended by the ITU-T are AAL1, AAL2, AAL3/4, and AAL5. See AAL1, AAL2, AAL3/4, AAL5, CS, and SAR.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
ATM adaptation layer 1. One of four AALs recommended by the ITU-T. AAL1 is used for connection-oriented, delay-sensitive services requiring constant bit rates, such as uncompressed video and other isochronous traffic.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
downstream physical unit. 1) In SNA, a PU that is located downstream from the host. 2) Cisco IOS software feature that enables a router to function as a PU concentrator for SNA PU 2 nodes. PU concentration at the router simplifies the task of PU definition at the upstream host while providing additional flexibility and mobility for downstream PU devices. This feature is sometimes referred to as DSPU concentration.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Switching system in which a dedicated physical circuit path must exist between sender and receiver for the duration of the "call." Used heavily in the telephone company network. Circuit switching can be contrasted with contention and token passing as a channel-access method, and with message switching and packet switching as a switching technique.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Relationship formed between selected neighboring routers and end nodes for the purpose of exchanging routing information. Adjacency is based upon the use of a common media segment.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Cabling that provides interconnections between wiring closets, wiring closets and the POP, and between buildings that are part of the same LAN.