|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
T means twisted pair cable. There are two types of cable STP (Shielded Twisted Pair Cable) and UTP (Unshielded Twisted Pair Cable). 100BaseT uses category 5, 5e, 6 twisted cable that is connected to RJ45.
Create Date
:
Friday, March 28, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
data bus connector. Type of connector used to connect serial and parallel cables to a data bus. DB connector names are of the format DB-x, where x represents the number of (wires) within the connector. Each line is connected to a pin on the connector, but in many cases, not all pins are assigned a function. DB connectors are defined by various EIA/TIA standards.
Create Date
:
Saturday, May 10, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Panel of I/O connectors that attaches to an equipment rack, providing easy access for data connections to a LightStream 2020 ATM switch.
Create Date
:
Sunday, April 27, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
The SC connector is the dominant connector for fiber optic Ethernet networks.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
At the printer end of a parallel printer cable is a Centronics 36-pin connector. The computer end of the cable should have a DB-25M connector to plug into the system's DB-25F LPT port.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
A typical serial printer cable will have either female 9-pin D-shell connector (DB-9) or a female 25-pin D-shell connector that will connect to the PC's serial (COM) port and a male 25-pin D-shell (DB-25M) that plugs into the printer.
Create Date
:
Saturday, April 26, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Various types of keyboard connectors have been used in different types of systems. The most common connectors used with PC keyboards are 6-pin PS/2 mini DINs, 5-pin DINs, and RJ-11jacks. PC-XT- and AT-compatible systems have historically used the 5-pin DIN connector, whereas the 6-pin mini DIN is used with ATX systems.
Create Date
:
Friday, April 25, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Only the USB port has hot-swap capabilities. The standard 5-pin DIN and 6-pin PS/2 mini- DIN keyboards cannot be hot-swapped. Neither can the standard RS-232C serial port. Doing so can cause damage to the keyboard, the port, and the system board. "
Create Date
:
Friday, April 25, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
Most portable designs only include two Type II-sized PC Card slots. These slots can physically accommodate two Type I or Type II cards, or a single Type III card. Type III cards only use one of the two 68-pin JEIDA connectors but take up the entire opening.
Create Date
:
Friday, April 25, 2008
Click here
to improve the Interview Question, Answer and other fields.
|
|
Inappropriate
|
See Answer
To Email:
Subject:
Note to go along with the question: (Optional, no
more than 1,000 characters)
A docking station, or docking port, is a specialized structure that permits the notebook unit to be inserted into it. When the notebook is inside, the docking port extends its expansion bus so that it can be used with a collection of desktop devices, such as an AC power source, a full-sized keyboard and CRT monitor, as well as modems, mice, and standard PC port connectors.
Create Date
:
Friday, April 25, 2008
Click here
to improve the Interview Question, Answer and other fields.